|
Network Setup Instructions Note that the access_prod program does not work properly if the set-up of the operating system is not consistent. For example: if in the 'info' file the third line looks like in the example below: HOSTNAME (none) It means that your network configuration is not properly setup: the domain name is not provided. In this case, you will be not able to run HKL/HKL2000 program suite. If you do not know your domain name, ask people from your IT department or your System Administrator. If you are using Linux RedHat/Fedora operating system, you may set up the domain name using the network configuration tool (requires root access). To start this tool, use one of the following methods:
After starting the tool, click on the DNS tag in
the Network Configuration Window. In the "DNS Search Path" section
in the "Search Domain" line, fill in your domain name (for example
myuniversity.edu or mycompany.com). This will correspond to the line HOSTNAME= myuniversity.edu (or mycompany.com) in the
info file. Click "Add". Your domain name will appear in the
"Domain Name" list. Note that section "Hostname" should be
filled with a computer name (for example mycomputer or mycomputer.myuniversity.edu). This information
will correspond to the line HOST-NAME=mycomputer in the info file. However it is not
enough for access_prod to have "Hostname"
section with a fully qualified domain name, but an empty DNS search path.
After finishing the changes click
"Apply" button and
then "Close" button. Save your changes. Run the access_prod program again. Now the info file should show the full domain name in the HOSTNAME line.
|
|
Last modified: January, 2006 Copyright © 2000-2006 HKL Research,
Inc.
|